Building your own home Solar Panel is possible, if you know how! Click Here For Solar Panel Videos and More Information! Yes, you can build your own home solar panel, and see how the sun’s energy can be converted to electric. You can build your own home solar panel by using cuprous oxide, copper, known to cause light to be turned into electricity. You can duplicate cuprous oxide on a thin sheet of copper.

Click Here For Videos and More Information on home Solar Panel building!

You will need about. You will need a voltmeter, a small machine that can detect a small amount of electricity to see the end result. Building your own solar panel means you will need some sort of electric stove or hot plate to heat the copper sheeting. Place the copper sheet on the burner and turn it on high and let it sit there for about 30 minutes. As it is heating up, you can see the plate turning colors. It will show the outline of the heating coil underneath the plate. You will see that as it gets hotter it will begin to turn dark until the entire sheet has a black coating.

After the entire sheet is black, turn off the burner and let it sit to cool for about 20 minutes. The now black cuprous oxide cools, and the black coating will start to pop off the sheet, leaving a thin coating of red on the copper. The red coating is needed to build your own solar panel. Most of the black can be rinsed off under running water, but it should not be brushed clean.

Salt Water actually Helps Produce The Electricity for your home solar panel. By using the alligator clips, connect the copper sheet to one the top of one side of the glass jar. Now it is time to attach another clean copper sheet to the other side of the jar. Combine 2 tablespoons table salt into hot water, mix well, cool, making sure it dissolves and then pour it into the jar. Watch out that the water does not get on the alligator clips. The two copper sheets should be under water with about one inch left exposed at the top of the car to build your own solar panel.

Click this image for more info onSolar Panels

Hey, now you are getting closer to your home solar panel. As carefully as you can, now put the whole apparatus into the sunlight, either via a window or place it outside - expose it to the sun. connect the voltmeter to the leads to the two alligator clips and you can see the meter indicate the power being generated by sunlight, if you were able to build your home solar panel. Now the sun’s energy from your solar panel is yours to use! You can feel proud!!! Click Here For Solar Panel Videos and More Information

One of the suggested ways in which California is going to reach the mandated renewable energy goal of 20 per cent by 2010 was through the installation of rooftop solar power panels. An announcement has recently been made by Toyota and SunPower Corporation, a manufacturer of high-efficiency solar cells, solar panels and solar systems, that they have completed the largest single-roof solar power installation in North America. The 2.3-megawatt SunPower system will begin operation in early October at Toyota’s North America Parts Center California (NAPCC) in Ontario, California.

This solar installation is large enough to provide around 60 percent of the total electricity needs for the 760,000-square foot NAPCC. Covering more than 242,000 square feet of the NAPCC’s roof, it includes 10,417 solar modules. Something like 6.4 million pounds of carbon dioxide emissions will be avoided annually, which is the equivalent to the emissions from the energy use of approximately 255 homes in a year.

“Toyota’s Earth Charter challenges the company to pursue all possible environmental technologies in the pursuit of sustainable mobility,” said Jim Lentz, president of Toyota Motor Sales, U.S.A., Inc. “That extends the company’s environmental responsibilities beyond products to include our manufacturing plants and other facilities where sustainable and renewable energy sources such as solar power are increasingly important.”

“Toyota is a global business leader in environmental sustainability,” said Tom Werner, chief executive officer of SunPower. “The solar power generated by this system will reduce Toyota’s operational costs at the Ontario facility immediately and over the long term, as electric utility rates continue to increase. Toyota understands that solar is affordable today as a means to improve the quality of our environment and promote local, clean, reliable power.”

The solar modules used in the installation are SunPower T10 Solar Roof Tiles, equipped with SunPower solar panels, the most efficient solar panels available on the market today. T10 Solar Roof Tiles are non-roof penetrating and tilt at a 10-degree angle to increase energy capture, somewhat similar to the effectiveness of solar roof shingles.

A third participant in this project is GE Energy Financial who will finance, own and operate solar power systems and Toyota will purchase the electricity generated from the system from them under a power purchase agreement (PPA) program. The benefits to Toyota come as an immediate power cost saving as well as a long-term hedge against rising peak power prices. Toyota owns the renewable energy credits associated with the system.