Looking for more ways to reduce the energy use around the home, we find that if we turn to the garden, just about every outdoor light can be replaced with solar powered products.

The advantages are obvious but can be masked by an up-front cost that may have some people baulking a little. Solar powered products such as a solar powered spotlight represent a one-time expense that then covers you from any rising energy costs. There are no wires to have to worry about in your garden and this makes them easily transportable or movable from spot to spot in the garden.

Mentioning the costs highlights another advantage with solar power, suddenly all future electricity costs relating to the outdoor lighting have disappeared. Solar energy is free once you’ve bought the hardware itself. Just plant the lights in the garden and they’re good to go. You also don’t even need to remember to turn the lights on each evening because they come with light sensors that turn them on at dusk and off again at daybreak.

You can soon surround yourself with outdoor lights that will never cost you a thing after you’ve bought them.

Building your own home Solar Panel is possible, if you know how! Click Here For Solar Panel Videos and More Information! Yes, you can build your own home solar panel, and see how the sun’s energy can be converted to electric. You can build your own home solar panel by using cuprous oxide, copper, known to cause light to be turned into electricity. You can duplicate cuprous oxide on a thin sheet of copper.

Click Here For Videos and More Information on home Solar Panel building!

You will need about. You will need a voltmeter, a small machine that can detect a small amount of electricity to see the end result. Building your own solar panel means you will need some sort of electric stove or hot plate to heat the copper sheeting. Place the copper sheet on the burner and turn it on high and let it sit there for about 30 minutes. As it is heating up, you can see the plate turning colors. It will show the outline of the heating coil underneath the plate. You will see that as it gets hotter it will begin to turn dark until the entire sheet has a black coating.

After the entire sheet is black, turn off the burner and let it sit to cool for about 20 minutes. The now black cuprous oxide cools, and the black coating will start to pop off the sheet, leaving a thin coating of red on the copper. The red coating is needed to build your own solar panel. Most of the black can be rinsed off under running water, but it should not be brushed clean.

Salt Water actually Helps Produce The Electricity for your home solar panel. By using the alligator clips, connect the copper sheet to one the top of one side of the glass jar. Now it is time to attach another clean copper sheet to the other side of the jar. Combine 2 tablespoons table salt into hot water, mix well, cool, making sure it dissolves and then pour it into the jar. Watch out that the water does not get on the alligator clips. The two copper sheets should be under water with about one inch left exposed at the top of the car to build your own solar panel.

Click this image for more info onSolar Panels

Hey, now you are getting closer to your home solar panel. As carefully as you can, now put the whole apparatus into the sunlight, either via a window or place it outside - expose it to the sun. connect the voltmeter to the leads to the two alligator clips and you can see the meter indicate the power being generated by sunlight, if you were able to build your home solar panel. Now the sun’s energy from your solar panel is yours to use! You can feel proud!!! Click Here For Solar Panel Videos and More Information